BIO-ADD® LUBRICANTS FOR DRILLING, STIMULATION & COMPLETION APPLICATIONS

Shrieve markets a portfolio of BIO-ADD® specialty lubricants for the drilling and completion applications. These products include lubricants for general purpose, extended-reach drilling (ERD), brine environments, HT, coiled tubing, beads and laterals.

Our drilling lubricants are based on natural and synthetic chemistries including Esters, Glycols, Natural Oils and Blends. They are formulated as for both water-based and oil-based drilling fluids to significantly improve well efficiency by reducing friction and lubricating bit bearings.

For more information on our range of products, please contact us.

BIO-ADD® 706

A blend of fatty acids and petroleum distillates designed as a lubricant for water-based muds, coiled tubing fluids, and horizontal drilling fluids. It has surfactant properties that coat the metal surfaces to create a lubricating layer. BIO-ADD 706 also coats the solids and drill cuttings, which keeps them suspended in the fluid and brings them to the surface. 

BIO-ADD® 706A

A blend of fatty acids and petroleum distillates designed as a lubricant for water-based muds, coiled tubing fluids, and horizontal drilling fluids. It has surfactant properties that coat the metal surfaces to create a lubricating layer. BIO- ADD 706A also coats the solids and drill cuttings, which keeps them suspended in the fluid and brings them to the surface. 

BIO-ADD® 707 

A specifically engineered and formulated lubricant designed for Extended Reach Drilling (ERD) in both water- based and oil-based muds. It contains strong metal wetting surface active agents for boundary lubrication. 

BIO-ADD® 707A

A specifically engineered and formulated lubricant designed for Extended Reach Drilling (ERD) in both water- based and oil-based muds. It contains strong metal wetting surface active agents for boundary lubrication. 

BIO-ADD® 757W

A winterized, non-sulfur, highly concentrated, environmentally safe synthetic lubricant specifically engineered and designed for Extended Reach Drilling (ERD) in water-based drilling muds. It also provides heat transfer properties and corrosion/moisture inhibitor properties in water-based drilling fluids. BIO-ADD 757W has reduced lubricity coefficients by over 80% in most water-based mud systems when run at 2% by volume, and over 86% when run at 3% by volume.  

BIO-ADD® 758

A multiple component blend designed as a lubricant for Extended Reach Drilling (ERD) in water-based drilling muds and as a coiled tubing lubricant for both fresh water and brine based fluids. It has surfactant properties that coat the metal surfaces to create a lubricating layer. 

BIO-ADD® 759

A polyoxypropylene/oxyethylene polymer in a polyalkylene glycol base fluid that is soluble in fresh water and heavy calcium chloride brines for use as lubricant in drilling applications. It can also be used in hydraulic fluids and refrigeration lubricant applications. BIO-ADD 759 has surfactant properties that coat the metal surfaces to create a lubricating layer.

BIO-ADD® 762

A blended proprietary lubricant for brines, designed for coil tubing and drilling fluid applications. This blend provides effective pipe on pipe friction reduction and has an acceptable environmental profile. BIO-ADD 762 easily disperses in brine fluids to simplify mixing procedures.

For further information on our complete oilfield product range, including Health and Safety data, please contact us using the information below.

Contact us about this product

Online Enquiry